Philips XL4902S/38 User Manual page 39

16 Frequently asked
questions
No signal bar is displayed on the screen.
• The handset is out of range. Move it closer
to the base station.
• If the handset displays [Register your
Handset], put the handset on the base until
the signal bar appears.
Tip
• For further information, see the chapter
Services, section Register additional handsets.
If I fail to pair (register) the additional handsets
to the base station, what do I do?
Your base memory is full. Unregister the unused
handsets and try again.
Tip
• For further information, see the chapter
Services, section Unregister the handsets.
My handset is in searching status, what do I
do?
• Make sure that the base station has power
supply.
• Register the handset to the base station.
• Move the handset closer to the base station.
I have chosen a wrong language which I cannot
read, what do I do?
1
Press to go back to the standby screen.
2
Press [Menu] to access the main menu
screen.
3
One of the following texts appears on the
screen:
38 EN
Réglages > Langue
Phone setup > Language
Telefon-Setup > Sprache
Config. telef. > Lingua
4
Select it to access the language options.
5
Select your own language.
The handset loses connection with the base or
the sound is distorted during a call.
Check if the ECO+ mode is activated. Turn it
off to increase the handset range and enjoy the
optimal call conditions.
No dialing tone.
• The handset is out of range. Move it closer
to the base station.
• Check your phone connections.
No docking tone.
• The handset is not placed properly on the
base station/charger.
• The charging contacts are dirty. Disconnect
the power supply first and clean the contacts
with a damp cloth.
I am a hearing aid user, what do I do to
improve the sound volume?
This phone is hearing aid compatible. This
enables the phone to couple with the hearing
aid device to amplify the sound and reduce noise
interference (see Set the hearing aid compatibility
on page 21).
I cannot change the settings of my voice mail,
what do I do?
The voice mail service is managed by your service
provider but not the phone itself.
Contact your service provider to change the
settings.
The handset on the charger does not charge.
• Make sure the batteries are inserted
correctly.