Philips XL4902S/38 User Manual page 37

14 Technical data
General specification and features
• Talk time: 16 hours
• Standby time: 250 hours
• Range indoor: 50 meters
• Range outdoor: 300 meters
• Phonebook list with 50 entries
• Redial list with 20 entries
• Call log with 50 entries
• Answering machine with up to 30 minutes
recording time
• Caller identification standard support: FSK,
DTMF
Battery
• Philips: 2 x AAA Ni-MH 1.2V 550 mAh
rechargeable batteries
Power adapter
Base and charger
• HuaJin: HJ-0600400A1 -UK
input: 100-240 V~, 50/60 Hz 150 mA,
output: 6 Vdc 400 mA
• Tenpao: S003IB0600040,
input: 100- 240 V~, 50/60 Hz 150 mA,
output: 6 Vdc 400 mA
Power consumption
• Power consumption in idle mode: around
0.70 W (XL490), 0.75 W (XL495)
Weight and dimensions (XL490)
• Handset: 142g (with Battery)
183.5 x 53 x 30.5 mm (H x W x D)
• Base: 87 grams
57.5 x 125.5 x 85 mm (H x W x D)
• Charger: 56.0 grams
57.5 x 94x 85 mm (H x W x D)
Weight and dimensions (XL495)
• Handset: 142g (with Battery)
183.5 x 53 x 30.5 mm (H x W x D)
• Base: 106 grams
57.5 x 125.5 x 85 mm (H x W x D)
• Charger: 56.0 grams
57.5 x 94 x 85 mm (H x W x D)
36 EN
15 Notice
Declaration of conformity
Hereby, MMD Hong Kong Holding Limited
declares that this product is in compliance with
the essential requirements and other relevant
provisions of Directive RED2014/53/ EU. You
can find the Declaration of Conformity or www.
p4c.philips.com.
Use GAP standard compliance
The GAP standard guarantees that all DECT
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make. The handset and base station are
GAP compliant, which means they guarantee
the minimum functions: register a handset,
take the line, make a call and receive a call. The
advanced features may not be available if you
use them with other makes. To register and use
this handset with a GAP compliant base station
of different make, first follow the procedure
described in the manufacturers instructions,
then follow the procedure described in this
manual for registering a handset. To register a
handset from different make to the base station,
put the base station in registration mode, then
follow the procedure described in the handset
manufacturers instructions.
Compliance with EMF
This product complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.