Philips XL4902S/38 User Manual page 34

Activate/deactivate the blacklist
1
Select [Menu] > [Services] > [Call block],
then press [OK] to confirm.
2
Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Select [Blacklist] > [Block mode] > [On]/
[Off], then press [OK] to confirm.
The setting is saved.
Change the call blocking PIN/passcode
1
Select [Menu] > [Services] > [Call block],
then press [OK] to confirm.
2
Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Select [Change PIN], then press [OK] to
confirm.
4
Enter the old PIN/passcode. The default PIN
is 0000. Then press [OK] to confirm.
5
Enter the new PIN/passcode, then press
[OK] to confirm.
6
Enter the new PIN/passcode again, then
press [Save] to confirm.
The setting is saved.
Network type
Note
• This is a country dependent feature. It only
applies to models with network type support.
1
Select [Menu] > [Services] > [Network
type], then press [OK].
2
Select a network type, then press [OK].
The setting is saved.
Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
• The maximum length of a detect number is 10
digits. The maximum length of an auto prefix
number is 10 digits.
• This is a country dependent feature.
Set auto prefix
1
Select [Menu] > [Services] > [Auto prefix],
then press [OK] to confirm.
2
Enter the detect number, then press [OK]
to confirm.
3
Enter the prefix number, then press [OK]
to confirm.
The setting is saved.
EN 33