Philips XL4902S/38 User Manual page 24

Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Key tone], then press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
The setting is saved.
Set the docking tone
Docking tone is the sound made when you place
the handset on the base station or charger.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Docking tone], then press [OK] to
confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
The setting is saved.
Set the battery tone
Battery tone is the sound made when the battery
is low and needs recharging.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Battery tone], then press [OK] to
confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
The setting is saved.
Eco mode
The ECO mode reduces the transmission power
of the handset and base station when you are on
a call or when the phone is in standby mode.
1
Select [Menu] > [Phone setup] > [Eco
mode], then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
The setting is saved.
ECO is displayed in standby mode.
Note
• When ECO mode is set to [On], the connection
range between the handset and the base station
can be reduced.
ECO+ mode
When the ECO+ mode is activated, it eliminates
the radiation of the handset and base station in
standby mode.
1
Select [Menu] > [Phone setup] > Eco+
mode, then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
The setting is saved.
ECO+ is displayed in standby mode
after a while.
EN 23