Icom IC-E208 Service Manual page 24

SOFTWARE ADJUSTMENT (RECEIVING)–Continued
ADJUSTMENT
TEMP. 1 • Operating frequency
CORRECTION • Receiving
<High power>
(UHF –10˚C)
[HP–]
(UHF +60˚C) 2 • Operating frequency
• Receiving
[HP–]
<Mid. power> 3 • Operating frequency
• Receiving
(UHF –10˚C)
[MP–]
4 • Operating frequency
(UHF +60˚C)
[MP–] • Receiving
<Low power> 5 • Operating frequency
(UHF –10˚C) • Receiving
[LP–]
6 • Operating frequency
(UHF +60˚C)
[LP–] • Receiving
1 • Operating frequency
PROTECT
SCALE • Receiving
(VHF)
[PM]
(UHF) 2 • Operating frequency
• Receiving
[PM]
PROTECT 1 • Operating frequency
POWER • Receiving
(VHF)
[PP]
2 • Operating frequency
(UHF)
[PP] • Receiving
ADJUSTMENT CONDITION
: 435.0 MHz
: 435.0 MHz
: 435.0 MHz
: 435.0 MHz
: 435.0 MHz
: 435.0 MHz
: 145.0 MHz
: 435.0 MHz
: 145.0 MHz
: 435.0 MHz
•Turn the [DIAL] to set to "F9" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "07" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• P0ush the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 130 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 140 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
5 - 6
OPERATION