Icom IC-E208 Service Manual page 20

' ' CONNECTIONS
FM DEVIATION ATTENUATOR
METER 50 dB or 60 dB
RF POWER METER
50 , 1 80 W
STANDARD SIGNAL GENERATOR
0.1 300 MHz
127 to 17 dBm (0.1 V to 32 mV)
CAUTION!
DO NOT transmit
while an SSG is
connected to the
antenna connector.
ADJUSTMENT ITEM EXPLANATION
Starting item
[Fr] [rE] [POH]
[HP ] *[rE+]
[HP+] [MP ]
*[SqN] *[SqW]
DISPLAY
[Fr]
[rF]
[POH], [POM], [POL]
[PL]
[PV]
[DE]
[DT]
[Tr]
[SL]
[SqW]
[SqN]
*[Fr1], *[Fr2], *[Fr3], *[Fr4],
*[Fr5], *[Fr6], *[Fr7], *[Fr8]
*Not adjust items
[POM] [POL] [POH]
*[rE ] *[Fr8] *[Fr7]
[MP+] [LP ] [LP+]
*[SL] *[CT] *[DT]
ADJUSTMENT ITEMS
Reference frequency
Reference voltage
VHF/UHF output power
Transmit minimum voltage
Protect voltage
Frequency deviation
DTCS wave form
Tracking
S-Meter
Squelch level (Wide)
Squelch level (Narrow)
Reference frequency's
temperature correction
[POM] [POL] [PL]
*[Fr6] *[Fr5] *[Fr4]
[HP ] [HP+] [MP ]
*[CT] *[DT] *[DTB]
DISPLAY
*[rE–], *[rE+]
[HP–], [HP+], [MP–],
[MP+], [LP–],[MP+]
[PM]
[PP]
*[PT]
*[PCV], *[PCU]
*[FT]
*[DTA], *[DTB]
*[DT], *[CT]
*[SL]
*[SqW]
*[SqN]
5 - 2
POWER SUPPLY
13.8 V, 20 A or more
JIG CABLE INFORMATION
AUDIO GENERATOR
300 Hz to 3 kHz
2.2 k
pin 7 (GND)
pin 4 (PTT)
to the microphone connector
[PV] [DE] [DT]
*[Fr3] *[Fr2] *[Fr1]
[MP+] [LP ] [LP+]
*[DTA] *[FT] *[PCU]
ADJUSTMENT ITEMS
Reference voltage
Temperature correction
Protect scale
Protect power
Protect time
Protect temperature
Cooling fan temperature
DTCS wave form
DTCS/CTCSS amplitude
S-Meter
Squelch level (Wide)
Squelch level (Narrow)
[Tr] [SL]
[SqN] [SqW]
[PM] [PP]
*[PCV] *[PT]