Table of Contents
Advertisement
AXIS S3016 Recorder
Specifications
LED
Product status
Hard drive status
PoE status
Rear LEDs
LED
Network port
PoE port
Left LED
PoE port
Right LED
Power button
•
To shut down the recorder, long press the power button until the buzzer makes a brief sound.
•
To silence the buzzer, short press the power button.
Color
Green
Amber
Red
Green
Amber
Red
All are red
Off
Green
Amber
Red
Off
Color
Blinks green
Blinks amber
Off
Green
Red
Off
Blinks green
Blinks amber
Off
24
Indication
The recorder is on and the status is ok.
The recorder is starting up, or the
firmware is upgrading. Wait until the LED
turns green.
This can mean that the PoE budget is
exceeded. If you just connected a device
to the recorder, try to remove it.
The drive is online.
This drive is online, but another drive is
broken.
The RAID is missing redundancy.
The drive is broken.
The RAID has failed. System is not
recording.
To identify the broken hard drive in case
of a RAID failure, go to the device web
interface and go to System > Storage >
Hard drive status.
No hard drive.
A device is connected.
PoE is in use but no network link.
The connected device can't start.
The PoE budget is exceeded.
PoE failure.
The port is not in use or is disabled.
Indication
2.5 Gbit/s
1 Gbit/s
No network
PoE is in use.
PoE failure.
The PoE budget is exceeded.
The port is not in use or is disabled.
1 Gbit/s
100 Mbit/s
No network
Advertisement
Table of Contents
