Figure 13. Remove one screw and remove the 2
Screw specifications
M1.98 x L3.0
Go to
https://support.lenovo.com/partslookup
replacement parts:
nd
2
SSD bracket
Remove the hard disk drive (HDD)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
Step 1.
Disconnect the HDD cable from the system board. Remove four screws and then remove the HDD
module.
Figure 14. Remove four screws and then remove the HDD module
Screw specifications
M2.0 x L3.0
Step 2.
Disconnect the HDD cable from the HDD. Remove four screw and then separate the HDD from the
HDD bracket.
nd
SSD bracket
Number of screws
1
to look up the Lenovo part numbers of the following
Number of screws
4
.
Chapter 4
Removing a FRU or CRU
37