Ventilation Function Crisp Finish; Dishes - Siemens CM936GA 1 Series User Manual And Installation Instructions

Table of Contents

Advertisement

en Ventilation function "Crisp Finish"
12  Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your meal
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Pizza setting 
¡ Circulated air grilling 
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
1.
Set a suitable type of heating and a temperature.
13  Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
13.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 16
13.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
18
extracts mois-
2.
a "On" is in the tile.
3.
a The appliance starts heating.
a The setting values are shown on the display.
4.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
a For "Crisp Finish"
a The operation continues without the ventilation func-
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
To call up the information, press . Some notes are
displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
Unless otherwise indicated, set the total weight for your
dish.
Recommended settings
For the recommended settings, the optimum type of
heating is preset as a fixed value.
You can adjust the preset temperature and the cooking
time.
Cooking methods
For some dishes, you can select a preferred cooking
method.
Select a cooking method with the following value for
conventional cooking:
¡ Classic
Dishes with microwave
For some dishes, you can select a cooking method
with microwave
If required, you can select other settings and com-
bine with the ventilation function.
Press "Crisp Finish".
Press
to start the operation.
When the food is ready, use
ance off.
Press "Crisp Finish"
⁠ .
, "Off" appears on the display.
tion.
When this time is reached, a signal sounds.
. The cooking time is reduced.
to switch the appli-

Advertisement

Table of Contents
loading

Table of Contents