Page 2
We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
(mobility and easy installation). The control unit SCI-700 has a capacity for 6 SCI-705R receiver modules. The conference system can be increased with another control unit taking the capacity of the system up to a total of 12 microphones. Just one SCI-710P president microphone can be used with up to 11 SCI-720D delegate microphones.
The most important characteristics of the wireless system are described below: SCI-700 Control Unit - Micro-processed control unit. - Capacity for 6 receiver modules. - Priority control. - Selector for maximum number of simultaneously open microphones. - Switch activated microphones.
POWER: on/off switch. MASTER: control unit output volume control. CHANNEL MODE: selector for the maximum number of microphones that can be open at the same time. Try to choose the lowest number of microphones possible to improve the S/N ratio of the system. PHONES VOL: headphone output volume control.
Page 6
SCI-705R RECEIVER MODULE 1.- RF: RF radio frequency signal level indicator. 2.- AF: AF audio signal level indicator. 3.- Module operating frequency indicator. 4.- UP, DOWN: module operating frequency, channel, squelch level (SQ) selection buttons and button block. See INSTRUCTIONS FOR USE section for more information. 5.- IR/SET: menu option selection button and sending of channel to microphone via IR.
Page 7
Example of the installation of 2 SCI-700 control units Firstly, connect all the SCI-700 unit aerials. If the microphones are far from the control unit, you might need an aerial signal amplifier to receive the signal with an appropriate level, for example model AMP-800S. If you are going to use more than 6 microphones, you will need two control units.
INSTRUCTIONS FOR USE INSTALLATION OF RECEIVER MODULES SCI-705R The conference system lets you use up to 12 wireless microphones which have to be accompanied by their respective receiver modules. To extract or insert receiver modules, you must remove the lid from the control unit. Remove the screw from the top in order to extract the module and push it outwards.
IR. Note: The channel frequencies for each module depend on their position within the control unit. On changing the channel (CHAN) in one of the SCI-700 unit modules, the frequencies in this channel in all modules will change automatically.
SPECIFICATIONS SCI-700 CHARACTERISTICS Micro-processed control unit. Capacity for 6 receiver modules. Priority control. Selector for the maximum number of operating microphones. IR frequency selection. Can be increased with a second control unit (12 receiver modules in total). RESPONSE 50-18 000 Hz...
Page 11
SCI-705R UHF 863 - 865 MHz receiver module. CHARACTERISTICS For UHF wireless conference system control unit. PLL tuner. IR transmission of the channel to the microphone. CONTROLS Channel selection and blocking Squelch adjustment RESPONSE 50-18 000 Hz INDICATORS LCD screen, channel visualization, RF signal level and AF level POWER SUPPLY Supplied by the control unit DIMENSIONS...
This product has been tested and has passed the corresponding quality control prior to being put on the market. FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General para la Defensa de los...
Need help?
Do you have a question about the SCI-700 and is the answer not in the manual?
Questions and answers