Table of Contents
Advertisement
Maintenance and care of the dosing system
CAUTION
Floor becomes wet!
To avoid an overheating of the drive, the fast run button may not be activated for more then 1 minute!
Rinse hoses (when changing cleaning agents or after each use)
1
Open the machine
MAINTENANCE
Once a year the hoses must be replaced. This replacement may be done only by Wetrok or by a Wetrok authorized specialist.
When using basic cleaner, it is imperative to rinse the system with fresh water. Otherwise, deposits and obstrucion of the system may happen.
2
Remove the supply hose
from the canister
3
Place in a container
with clean water
Press the fast run button.
4
Water is being sucked
in at a high speed and
pumped through the hoses
up to to brushes
EN
Page 31
Advertisement
Table of Contents
