Table of Contents
Advertisement
Robotic operator
1
Put the machine in the
correct
"home" position
(starting point)
2
Select the surface to be
cleaned
3
Press the "Play" button
When switching on the machine a hourglass appears that hides after approx. 1 to 2 minutes. During this period the robotic mode is not available.
Important: The "home" position of the path has to be right at the "teached" home position.
(Within a radius of 1 m).
In case of an error: Detected an obstacle = flashing in orange; Detected an error = flashing in red.
4
The machine searches for
the home position.
LED glows in blue
5
The machine is now ready
for cleaning the surface
The drawbar must be folded
down
6
Forward =
bleu/orange flashing
7
Cleaning finished =
glowing in green
EN
Page 25
Advertisement
Table of Contents
