Table of Contents
Advertisement
Commissioning
SAFETY
▪ When leaving the machine, the machine must be secured against unintended motion, and the ( ) button must be switched off. If available, the mains
connection must be unplugged.
▪ Before starting maintenance work or cleaning, switch off the machine and secure against involuntary switching on.
▪ Turn off the machine and disconnect from the mains before changing the brushes and Pad-drive pulleys / pad, suction nozzle and suction lips
▪ When using cleaning and care products, observe the producer's hazard warnings We recommend to always wear protective goggles and protective clothing.
▪ Express reference is made to the hazards when using highly inflammable, combustible, toxic, health-threatening, corrosive or irritant substances.
Restrictions:
• There must be no carpets or similar surfaces in the working area that could be damaged if the machine runs over them.
• Descents, such as steps, stairs, ramps, water basins and the like, should not be present in the working area or must be safely screened off.
• The learned (taught) path must be free of obstacles.
• There must be no persons, animals or objects in the working area.
• The user must ensure that the path for automated operation by the machine is clear so that the machine can carry out its work.
One tank of water/chemicals is sufficient with average water dosing for about 38-53 minutes.
Overload protection: If the brush motor is blocked during operation, the machine is switched off automatically!
Be switching the machine OFF-/ON again, you can continue your work.
Fresh water hose is under pressure (max. water inlet pressure 6 bar)!
Empty dirty water tank before refilling fresh water tank.
EN
Page 17
Advertisement
Table of Contents
