Figure 45: Default Pin Configuration For Waking Up Host Mcu; Figure 46: Another Pin Configuration For Waking Up Host Mcu - Renesas DA16200 User Manual

UM-WI-058
DA16200 DA16600 Getting Started with Azure® IoT
AT+AZU SET APP_MCU_WKAEUP_PORT GPIO_UNIT_A
AT+AZU SET APP_MCU_WKAEUP_PIN GPIO_PIN11

Figure 45: Default Pin Configuration for Waking Up Host MCU

Other GPIOs in the DA16200 EVB can be used for waking up the host MCU as shown in
For example, GPIOC_6 can be configured for waking up host MCU using the below AT commands
(see Figure 46).
AT+AZU SET APP_MCU_WKAEUP_PORT GPIO_UNIT_C
AT+AZU SET APP_MCU_WKAEUP_PIN GPIO_PIN6

Figure 46: Another Pin Configuration for Waking up Host MCU

Table 4: GPIO Pin Configuration
Port
GPIO_UNIT_A
User Manual
CFR0012
// GPIO_A port
// GPIO_11
// GPIOC port
// GPIOC_6
PIN Mux
PIN_AMUX
PIN_BMUX
Revision 1.4
34 of 83
Table 4.
GPIO(Port)_Pin
GPIOA_0
GPIOA_1
GPIOA_2
GPIOA_3
Jan. 26, 2024
© 2024 Renesas Electronics