6.00 Connection
of the Battery Adaptor (KX-A26D)
1) Drive the two small screws (accessory) on the
bottom of the unit.
2) Place the Metal Plate so that the screw heads
insert into the slots as shown.
3) Slide the Metal Plate in the directions of the
arrows, and drive the screws.
Metal Plate
Insert Battery Adaptor into the Battery Adaptor
Compartment (Base Shelf).
Pull out the cords from the left side of the
Battery Adaptor.
i-
i
Slide the Metal Plate on Battery Adaptor
toward you and fix it to the Holder attached to
Base Shelf, as illustrated.
2-C-32