Panasonic KX-T336 System Reference Manual page 223

2.10 Flexible SCOlGCO Assignment
Descrtption 1. Restricxns"on SCOGCO Assianment has been lifted.
Therefore. CO lines of the same trunk group can be assigned to both GCO
(as a group unit) and SC0 (as a single unit) at a time.
*' Refer to CO Appearance Type in Section 9-E-l .02 "Trunk Group (U2)."
Assuming that Trunk Group 01
consists of the following CO lines.
Case 1. Case 2.
Case 3.
-1 r-l r-
EXT.100 EXT.100 EXT.1 00
sco-1011
sco-1012
x0-01
Old version
Case 1
1 Case 2 Case 3
Available * 2
Not Available
1 New version 1 Avaifabfe
I
*2 In old version. either Case 1 or 2 is avail&k for the Trunk Group 01
depending on the setting of "Group-Trunk Group: CO,Appearance
Type.
(Appearance of the call indication in Case 3.)
SC0 has priority over GCO when incoming CO calls come.
When an outside call via CO line-l
011
comes in on an extension, the
call indication appears on SCO-1011, not on GCO-01.
However
it may appear on GCO-01, if SCO-1011 is in use as follows.
3-D-17-1
(40993)