Panasonic KX-T336 System Reference Manual page 174

Now program the 3/6 digit toll restriction plan
according to the Table 1 and Table 2 using "Area/
Office Code Table."
In this table, numbers in "Code" field can be used
either as AC or OC.
First select "N" in "L" field, and enter Restriction
Level for each AC or OC in "RL" field according to
the Table 2.
294
3-c- iI
In the area where Dialing Plan Type B is adopted,
there are no Office Codes which are identical with
Area Code, so you can assign the Restriction
Level of AC and OC respectively using different
"Area/Off ice Code Table." (Refer to 3-C-l .02 for
Dialing Plan.)
When there are some Office Codes which are
identical with Area Codes, refer to
"(3) Programming the 3/6 Digit Toll Restriction
Plan by selecting 'Y" in I" field." L= LJX~L?
Toll Restriction-Area/Offi& Code Tabk>F $X *L
_-----_--- - -- -
Area/Office Code Table No.=1 Entry =200
---------
'210 'No1
I bl
I 1::
I lb'
I I
Ino I lrnl 12* I
I- Enter Restriction Level of Area Code
Select N (Defautt Setting)
Area Code
Toil Restriction-Area/Office Code Tabi~~~~$R kL
_--------- - -
Area/Office Code Table No.=1 Entry =300
Enter Restriction Level of
Office Code
Select N (Defautt Setting)
Office Code
(2) Programming the 3/6 Digit Toll Restriction
Plan Using "OC" field.
When you want to restrict an outgoing call for
certain area except a district within that area,
program the toll restriction plan by entering Office
Code Table No. in "OC" field of that Area Code
and set Office Code of the destrict in that Office
Code Table.
Assuming that your system is located in Area A
AG200, and Restriction Level of Area 6 is set to
"10."
So extension users with TRLE of 11-16 are
restricted to place a call to Area B.
Area A
AC=2001 !
I
O&322 i O&320
OC=320
RL=l6 f RL=16
L
I
I
I
------ ---s-w
l-
OC=322
I
I
I
I
I
L
O&323
3-C-l 8