C Holding Features - Panasonic KX-T336 System Reference Manual

C. Holding Features
1.00 Hold
Description
Allows an extension user to hold the current call
and either make or answer another call
(extension or outside).
Operation
' f
To hold a call, dial the feature number for "Hold."
To retrieve a held call, dial the feature number for
"Hold Retrieve."
Programming
System Programming
Reference
VT I Dumb
"System-Numbering Plan (4/g)", 9-D-6.04 10-C-10.00
Hold
Hold
Retrieve
Conditions
SLT telephone user cannot hold the multiple calls
at a time. So if the SLT telephone users attempt
to hold another call while holding a current call,
reorder tone is heard. If SDN button for SLT
telephone user is busy, the SLT telephone users
cannot hold a call even though no call is held by
SLT.
The extension users can not hold the following
calls.
l
A call with Attendant Console
l
A call with Doorphone
If a held call has not been answq$d more than a
pre-assig$&ime, a warning ton<rriay sound at
extension which placed a call on hold.
Refer to Section 3-E-2.00 "Held Call Reminder"
for further information.
If a held call is not answered more than 30
minutes, it will be disconnected automatically.
Placing a call on hold.
1. Press the switchhook for
approximately one half second
and release.
l
The other party is held
temporarily.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
2. Dial the feature number for
"Hold."
l
The other party is placed on
hold.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
Retrieving a held call
1. Lift the handset.
l
You hear dial tone 1 or 3 or 4.
2. Dial the feature number for "Hold
Retrieve."
l
You hear confirmation tone 3
and Hold is retrieved.
l
Stat-f conversation again.
Music on Hold will be sent to the held party if
available. For sending Music on Hold, prior
assignment is necessary. Refer to Section
3-E-l .OO "Music on Hold" for further information.
5-c-1