Automatic Redial - Panasonic KX-T336 System Reference Manual

Hide thumbs Also See for KX-T336:
Table of Contents

Advertisement

4.04 Automatic
Redial
Description
Automatic Redialing is activated by pressing the
SP-PHONE button and REDIAL (LNR) button
successively (On-hook dialing).
Redialing will be repeated 15 times automatically
at 40-second intervals until the called party
answers.
(These settings can be changed by system
I
pq;am=~ng.
Refer
to Section 1 O-C-51 .OO
-;Vc:id Select 1 (WSl)" for further information.)
F*io answer after dialing 15 times conclude this
function, turning the SP-PHONE button off.
Automatic Redialing is available with the
following PITS telephones only:
KX-T123230D, KX-T123235, KX-T7130, KX-
T7030, KX-T7050
, .-
I
Press the REDIAL (LNR) button in hands-free status
I
Redialing automatically
I
I
I
When no idle line is
When the opposite
available
station is busy
When ringbaLk tone sounds
from the other party
Busy tone sounds
for five seconds
The other party answers
I
c
Conversation
1
i
Stand by for 40 seconds.
(During this time, the indicator
on the SP-PHONE button
:
. .
flashes in red slowly. In other
status, indicator lights).
.:)
I
I
Programming
None
-L
Conditions
Besides the number, this function memorizes the
button used for the last call and executes
automatic redial on that button.
Pressing the REDIAL (LNR) button while the last
used button is in use causes the system to wait
until the button becomes idle. As soon as the
button becomes idle, this function is executed.
If the last used button was the PDN and multiple
PDNs are available, the system selects any idle
PDN.
Automatic Redialing is terminated, if any key
operation is made during Automatic Redialing.
If a CO line is not seized, busy tone sounds for
five seconds.
a
.
Turning the SP-PHONE off while hearing busy
tone activates Automatic Callback-Trunk.
For further information, refer to Section 4-C-6.01
"Automatic Callback-Trunk."
Operation
1. Press the SP-PHONE button.
2. Press the REDIAL (LNR) button.
l
The indicator on the SP-
PHONE button flashes in red
slowly for 40 seconds of
standby status.
4-c-1 5

Advertisement

Table of Contents
loading

Table of Contents