Panasonic KX-T336 System Reference Manual page 397

1.02 Screened Call Transfer to Station
Description
Allows an extension user to transfer a call placed
on the DN or CO button to another extension with
announcement.
Programming
None
Conditions
The
extension users can not transfer the
following calls.
l
A call on ICM button
l
A call with Attendant Console
l
A call with Doorphone
l
Paging Announcement through built-in
speaker of PITS
If Music on Hold is available, from the start of the
transferring operation until the destination party
answers, the system sends Music on Hold to the
transferred party.
For further detail, refer to Section 3-E-l .OO
' Music on Hold."
Operation
During a conversation with an exiension or ar
outside party on the DN or CO button
TRANSFER
Ll
1.
Press the TRANSFER button.
l
The other party
is
placed on
Consultation Hold.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
l
If your PITS has a display,
it
shows:
q z 4*
(Supplement)
1 Transfer to 1
Dial the directory number of the
destination: three or four digits.
l
You hear ringback tone.
After the destination answers,
make the announcement.
Replace the handset or press the
SP-PHONE button.
l
The transferred Garty and the
destination party
start
conversation.
After step 2, you can interrupt the transfer and
talk to the held party, (1) if the destination has
+- already answered, wressing the FLASH
button, and then the TRANSFER button. (2) if
the destination has not answered yet, by
pressing the TRANSFER button only.
-
After step 2, you can change the destination by
pressing the FLASH button while hearing
ringback tone, busy tone, or DND tone. Then
after hearing dial tone, dial the directory number
of
the
new destination.
4-F-2