Do Not Disturb (Dnd) - Panasonic KX-T336 System Reference Manual

6.00 Do Not Disturb (DND)
Description
Do Not Disturb allows an extension user to
appear busy to all incoming calls (intercom,
extension and
outside calls).
To utilize this
feature,
assign "System-Class of
Service", Call Forwarding/Do Not Disturb to "Yes"
beforehand by system programming.
This feature can be assigned and canceled either
by dialing the feature number or using the
FWDIDND button.
Programming
Fkterence
System Programming
v-r Dumb
"System-Class of Service (l/2)".
SW.01 lW-7.00
Call Forwarding/Do Not
Disturb
"System-Numbering Plan (S/9)' . 9-D-6.05
10-C-10.00
Do Not Disturb Set
. .
Call
Forwarding/Do Not
Disturb Cancel
Conditions
(1)
(2)
(3)
IRNA
- Automatically
If a catl via DWUDID is directed
to an
extension in the DND mode, it will be
automatically redirected to another extension
(including VPS extension) or an Attendant
Console assigned as the IRNA destination.
Refer to Section 3-F-5.00 "fntercept Routrng
- No Answer (IRNA) for further information.
Making Calls
.-t&2
An extension in the DND mode can still be
used to make calls
and access
any other
features available to
that
extension.
Answering Calts
An extension in the DND mode is available:
l
To answer a call if its indiiion of arrival is
showi, on his or her extension.
Refer to (Supplement 2) on page 4-D-14 for
further information.
l
To answer a call ringing at another
extension by "Call Pickup" feature.
Refer to Section 4-D-3.00 "Call Pickup" for
further information.
(4)
FWD/DND
Setting DND feature cancels any Call
Fowarding feature pre-assigned on the
extension and vice versa.
Refer to Section 4-F-2.00 "Call Forwarding
(FWD)" for further information.
(5)
BSS/OHCA
DND is effective for BSSIOHCA.
Refer to Section 4-C-5.04 and 4-C-5.05 for
further information.
(6)
DND Override
"Do Not Disturb Overrfde" allows extension
users to override ' Do Not Disturb" feature
assigned on the called extension user.
Refer to Section 4-C-8.00 ' Do Not Disturb
Override" for further information.
Operation
Assigning Do Not Disturb (1)
I
1. Lift
the handset or press
the
SP-PHONE button.
l
You hear dial tone 1 or 3 or 4.
2. Dial the feature number for Do
Not Disturb Set yy*l" (default).
l
You hear confirmation tone 1 or
2 and then dial tone 1 or 3 or 4.
~--+*e-# your PITS
has a
display, it -
shows:
1 Do Not Disturb 1
3. Replace the handset or press the
SP-PHONE button.
I J
l
The FWD/DND indicator lights.
4-D-12
(30393)