Table of Contents
Advertisement
Feather Stitch hand operated
a) with one needle
b) with two needles
Stitch lenirth
aimott zero
Almost zero
Stitch width
21/,
3' i
Stitch locution
C
C
almost zero
2
C
b
yis.
62
Satin stitch control
Most ornamental stitches are
sewn with a stitch length of
"almost zero", i.e. with a
very small material feed. If,
between the making of such
stitches, the machine is used
with a larger material feed,
e. g. for normal sewing jobs,
the resetting of the stitch
length
to
" almost
zero ''
causes a little trouble and
some waste of time. This de¬
fect is remedied by the built-
in
patented
straight-sided
satin stitch stop 68 69 (Fig.
2). If, for instance, you are
doing norinul sewing work
with the stitch length 2 and
want to change hack to the
straight-sided
satin
stitch,
then swivel the stop to the left by lifting handle 59, which projects from the vertical
part of the frame, upwards until it meets with resistance, and move the stitch regulator
knob 14 (Fig. 2) upwards as fur as it will go. The straight-sided satin stitch can now
be sewn without your needing to apply any hit-or-miss method. By pressing the handle
59 down, the normal position for the selection of the stitch length, forwards and back¬
wards, is restored.
With a particular stitch length seams of varying thickness result according to the
thickness of the yarn. The stop is thus set at the desired yarn thickness as follows :
By turning knob 68 a very little to the right, the stitch length is shortened, which
results in the seam being thicker; this is necessary when thin yarn is used. A very little
turn to the left results in a slight increase in the little length so that a seam of uniform
thick
muss can bo
uchiovod with thick yarn as well.
Automatic Fancy Stitches
OiUy applicable to Model SJO-9
Every BEKNINA Record Machine Model 630-2 is equipped with the automatic orna¬
mental stitch device which enables ornamental stitches to be sewn without manipulation
of the controls. Just select the pattern desired, set the control lever and then simply
concentrate on guiding the fabric through the machine with both hands free to do so.
82
83
Advertisement
Table of Contents
