Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
system
board.
NOTE:
The system board can be removed with the following components attached:
● heat sink
● fans
● solid-state drive
6. Remove the
power button with fingerprint
7. Remove the keyboard.
About this task
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal
procedure.
Figure 54. Removing the palm-rest assembly
Steps
After performing the steps in the pre-requisites, you are left with the palm-rest assembly.
72
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
reader.
computer.