Dell XPS 13 9340 Owner's Manual page 82

Table 32. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Table 33. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
Full Screen Logo
Table 34. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
Wireless Radio Control
82 BIOS Setup
Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID ON option is selected. The storage device is configured to
support RAID functions.
Displays the information of various onboard drives.
Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD–0 option is enabled.
When enabled, the BIOS can receive analytical information from the integrated
devices and send notifications during startup about possible future failure of the
hard drive.
By default, the SMART Reporting option is disabled.
Displays the information of onboard drives.
Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
Enables or disables the internal WLAN device.
By default, the WLAN option enabled.
Enables or disables the internal Bluetooth device.
By default, the Bluetooth option enabled.
Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.