Akai ABTS-08 Manual page 3

⑦ Mic Hole
⑧ Play/Pause & Voice Assistant Button
⑨ RGB Light
⑩ Power Button
Power On/Off
Long-press the Power button to turn the speaker on and off.
Bluetooth:
● Turn the power button to "ON". The speaker enters Bluetooth mode automatically.
● Activate Bluetooth of mobile phone and search for device name "AKAI ABTS-08" then
connect it.
● Play the music from your mobile phone and enjoy.
● Long-press Forward or Backward button to select songs.
● Short-press Forward or Backward button to adjust volume up and down.
● Short-press Play/Pause button to play/pause the music.
● Long-press the RGB Light button to disconnect the Bluetooth connection with the mobile
device.
AWS Function:
● Turn on two identical speakers you want to pair, both under BT mode. Only need to set one
of the two units.
● Long-press the AWS button to pair, speaker will make a tone to start to pair, and make a
tone again after paired successfully.
● Make Bluetooth connection with your mobile phone to play music by the two paired
Speakers.
● Long-press the AWS button again to exit AWS function.
Playing music from USB disk:
● Turn the Power button to "ON".
● Insert USB flash disk into slot, the speaker will play the stored music automatically. USB
maximum support is 32GB
● Long-press Forward or Backward button to select songs you like, short-press to adjust the
volume up and down.
● Short-press Play/Pause to play or pause.
Notes: Under any playing mode, when you insert a USB disk to the speaker, it will switch to
play the USB disk.
FM Radio: