Clutch - BMW Motorrad R 18 Rider's Manual

Adjusting headlight beam
throw
If, for a high load, the adjust-
ment of the spring pre-load
is no longer sufficient not to
dazzle oncoming traffic:
Slacken nut 3.
Slacken nut 2.
Headlight 1 can be tilted
through its range of adjust-
ment.
Adjust beam throw by tilting
headlight 1 slightly about its
horizontal axis.
Secure the headlight in posi-
tion by tightening nut 2.
Tighten nut 3.
When the motorcycle is again
ridden with a lower load:
Have the basic settings of the
headlight restored by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.

CLUTCH

Adjusting clutch lever
WARNING
Relocated clutch-fluid reser-
voir
Air in the clutch system
Do not turn the handlebars
or the handlebar fitting on
the handlebar.
WARNING
Adjusting the clutch lever
while riding
Risk of accident
Adjust the clutch lever only
when the motorcycle is at a
standstill.
Applying light pressure from
behind, turn adjuster knob 1
to the desired position.
The adjusting screw can
be turned more easily if
77