Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Construction Equipment
  5. 22202E-B
  6. Owner's manual & safety instructions

Bauer 22202E-B Owner's Manual & Safety Instructions

4 cubic ft. cement mixer
Hide thumbs Also See for 22202E-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
NOTICE
FOR CEMENT AND
MORTAR ONLY.
Do not use with Epoxy
2-part resin mix.
22j

Advertisement

loading

Related Manuals for Bauer 22202E-B

Summary of Contents for Bauer 22202E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. table of contents Safety ............2 Maintenance ..........2 Specifications ..........7 Parts List and Diagram ......
  • Page 3 NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. 11. DON’T FORCE TOOL. It will do the job better 16. DON’T OVERREACH. Keep proper and safer at the rate for which it was designed.
  • Page 4 NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. Grounding tO prEVEnt ELEctric SHOcK anD DEatH FrOM incOrrEct GrOunDinG WirE cOnnEctiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
  • Page 5 NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. connecting cords taBLE a: rEcOMMEnDED MiniMuM WirE GauGE FOr EXtEnSiOn cOrDS* (120/240 VOLt) To reduce the risk of the cords pulling apart during operation, do one of the following: EXtEnSiOn cOrD...

  • Page 6: Safety

    NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. Vibration Safety This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury,...

  • Page 7: Specifications

    NOTICE NOTICE FOR CEMENT AND MORTAR ONLY. FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Do not use with Epoxy 2-part resin mix. Specifications Electrical Input 115 VAC / 60 Hz / 4.3 A Motor No Load Speed 1680 RPM Horsepower Drum Speed...

  • Page 8: Setup

    NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Setup - Before use read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this document including all text under subheadings therein before set up or use of this product. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the power Switch of the tool off before performing any procedure in this section.
  • Page 9 NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. 8. Attach Motor (20) to Support Frame (17) 12. Slide Drum (14) onto the Motor Shaft and line up by sliding Motor Shaft and threads through pin holes between Motor Shaft and Drum Shaft.
  • Page 10 NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions Drum Front Handle...
  • Page 11 NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. General Operating instructions WarninG! tO prEVEnt SEriOuS inJury: 4. Add material to the Drum. Typical maximum Do not operate the Mixer on slopes or uneven quantities include: 2 80lb bags of cement surfaces with an incline greater than 5º.

  • Page 12: Maintenance

    NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
  • Page 13 NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2.

  • Page 14: Parts List And Diagram

    NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. parts List and Diagram parts List part Description part Description Hex Bolt M12x90 Flat Washer M8 Wheel Bushing Support Frame Wheel Shaft Pin Ø12.5 Front Leg Cotter Pin Ø5x20 Support Frame Motor...
  • Page 15 NOTICE FOR CEMENT AND MORTAR ONLY. Do not use with Epoxy 2-part resin mix. assembly Diagram record Serial number Here: note: If product has no serial number, record note: Some parts are listed and shown month and year of purchase instead. for illustration purposes only, and are not available individually as replacement parts.

  • Page 16: Warranty

    pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

This manual is also suitable for:

58991