Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b
Advertisement
Table of Contents
Related Manuals for Bauer 1952E-B3
Summary of Contents for Bauer 1952E-B3
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 table of contents Safety ................2 Maintenance ..............8 Specifications ............3 Parts List and Diagram ..........10 Setup .................4 Warranty ..............12 Operation ..............5 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Page 3 12. Use extra care when cleaning on stairs. 21. Stay alert, watch what you are doing and use common sense when operating an appliance. 13. Do not use to pick up flammable or Do not use an appliance while you are tired or under combustible liquids, such as gasoline, or the influence of drugs, alcohol or medication.
- Page 4 Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the power Switch of the appliance off and unplug the appliance from its electrical outlet before performing any procedure in this section.
- Page 5 Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Vacuum Operation tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the Switch off and unplug the power cord from its electrical outlet before removing the power Head. 1.
- Page 6 10. WHEn WEt VacuuMinG: table a: rEcOMMEnDED MiniMuM WirE GauGE FOr EXtEnSiOn cOrDS (120 VOLt) iMpOrtant! Leave a gap at the tip of EXtEnSiOn cOrD the nozzle opening to allow air inflow. naMEpLatE Do not immerse the nozzle completely in liquid. LEnGtH aMpErES (at full load)
- Page 7 Blower Operation tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the Switch off and unplug the power cord from its electrical outlet before removing the power Head. 1. Pull out on the tabs on the sides of the 6. cautiOn! Wear anSi-approved Power Head and pull up on it to remove it.
- Page 8 user-maintenance and Storage procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn the power Switch of the appliance off and unplug the appliance from its electrical outlet before performing any procedure in this section. tO prEVEnt SEriOuS inJury FrOM appLiancE FaiLurE: Do not use damaged equipment.
- Page 9 pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
- Page 10 parts List and Diagram parts List part Description part Description Handle Tank Power Switch Vacuum Port Top Cover Crevice Tool Baffle Utility Nozzle Motor Foam Filter Power Cord Clamp Ring Power Head Cloth Filter Filter Cage Hose record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead.
- Page 11 assembly Diagram Item 64753 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.