Table of Contents
Advertisement
WARNING!
• Do not remove the filter while the
appliance operates.
• Do not clean the pump if the water in
the appliance is hot. Wait until the
water cools down
Proceed as follows to clean the pump:
1
180˚
46
ENGLISH
2
1. Open the pump cover.
2. Place a suitable bowl below the drain pump
access to collect the water that flows out.
Always keep a rag nearby to dry up any water
spillages when removing the filter.
3. Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the water
flow out.
4. When the bowl is full of water, turn the filter back
and empty the container.
5. Repeat the steps 3 and 4 until the water stops to
flow out.
Advertisement
Table of Contents
