Electrolux EW8W3816BI User Manual page 36

About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The SensiCare detection is carried out
with complete washing programmes only
and if the programme duration has not
been reduced by means of the Time
Manager button.
The SensiCare System is not available
with all programmes such as :Wool,
Rinse and programmes with short cycles.
11.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Start / Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start / Pause
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to activate
the appliance.
36 ENGLISH
If the SensiCare System has completed
and the water filling has already started,
the new programme starts without
repeating the SensiCare System. The
water and the detergent are not drained
out in order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20 minutes
after the starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position
2. Wait for 1 second. The display shows
Now, you can set a new washing programme.
11.11 Opening the door - Adding
garments
If the
door.
If the temperature and level of the water
button.
in the drum are too high and/or the drum
is still rotating you should not open the
door.
While a programme or the delay start
button again.
operates, the appliance door is locked. The
display shows the indicator
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Start / Pause
goes off.
The door unlocks and the indicator
off.
1. Press button On/Off to deactivate the
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
.
.
icon is on, you can always open the
appliance.
.
button
goes