Table of Contents
Advertisement
M
N
O
y
x
y
16-22 mm
Ø 35 mm
12,5 - 14 mm
595-598 mm
449
mm
22±1,5 mm
A
Make sure that the plate with magnet is on
the upper position.
Cupboard door preparation
For countersinking the door, it is
recommended to call a professional.
Align the cupboard door to the furniture correctly.
Measure the distance X to fix the height of the
hole to countersink the upper hinge. The centre of
the hole Y should be at the same height of the
stroke on the hinge support.
Set the position of the lower hole respecting
dimensions and distances shown in the drawing
(449 mm).
Countersink the holes.
Hinges
To mount the hinges it is necessary to drill two
holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door) on the
inner side of the door.
The hinges will be fixed to the door by means of
the four supplied screws A.
ENGLISH
17
Advertisement
Table of Contents
