Electrolux EW8W3816BI User Manual page 38

12.1 Complete wash&dry
programme
Non-automatic wash&dry programmes
In some washing programmes, you can
combine Wash Mode and Dry Mode for
running a complete wash&dry programme.
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off button for some seconds
to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in the
appropriate compartment.
4. Turn the programme dial to the washing
programme. The appliance defaults to the
washing only mode and the indicator of
the Wash Mode button is on. The display
shows the default temperature and spin.
If necessary, change them according to
your laundry. The display also shows the
maximum recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Tap on the Dry Mode button to activate
also the drying function. Both indicators of
the Wash Mode and Dry Mode buttons
are on. The indicators
on the display. The display also shows
the maximum recommended load for a
washing and drying programme (e.g. 4 kg
for cottons).
12.2 Washing and Drying -
Automatic levels
1. Tap on the Auto Dry button repeatedly
until the display shows the required
dryness level. The indicators in the
display illuminate accordingly:
a. Iron dry: for cotton items;
b. Cupboard dry: for cotton and
synthetic items;
c. Extra dry: for cotton items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load size.
38 ENGLISH
2. Touch button Start / Pause
In the display the door locked
comes on.
The display also shows the remaining
programme time.
12.3 Washing and Timed Drying
1. Tap on the Time Dry button repeatedly to
Each time you tap on this button the time
value increases by 5 minutes. The display
shows the set new time value.
2. Touch the Start / Pause
In the display the door locked
and appear
comes on.
The display also shows the remaining
programme time.
12.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they are
• In the display
• The indicator of the Start / Pause button
To have a good drying by using less
energy and in a shorter time, the
appliance does not let you set a too low
spin speed for the items to be washed
and dried.
the programme. The SensiCare
estimation starts.
set the desired time value (see the
"Timed drying" table in the "Programmes"
chapter). The drying level indicator
goes off and the indicator
start the programme. The SensiCare
estimation starts.
active).
goes off. The door locked
off.
The appliance continues to operate with
the anti-crease phase for approximately
30 minutes or more if Anti-crease option
was set.
The anti-crease phase reduces creasing.
You can remove the laundry before the
anti-crease phase is completed. We
recommend, for better results, that you
to start
indicator
comes on.
button to
indicator
comes on.
goes