Table of Contents
Advertisement
MIX
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are not available
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set
incompatible options/functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
Auto Dry indicator:
Iron dry
Cupboard dry
Extra dry
Washing phase indicator
Extra Rinse indicator.
UltraCare phase indicator.
Drum clean indicator. This is a recommendation to perform the drum cleaning. Re‐
fer to paragraph "Cleaning the drum" in "Care and cleaning" chapter.
Anti-crease phase indicator. Read the 'Permanent Anti-crease' paragraph for more
details.
Drying phase indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Rinse Hold indicator.
Maximum load indicator (refer to "The SensiCare System load detection " para‐
graph).
It flashes when the laundry load exceeds the maximum declared load of the
selected programme.
Add garments indicator. It lights at the beginning of the washing phase, when it is
still possible to pause the appliance and add more laundry.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy consumption,
you may need to activate the appliance
again.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.3 Temperature
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Touch this button repeatedly until the desired
temperature value appears on the display.
When the display shows the indicators
the appliance does not heat the water.
,
ENGLISH
21
Advertisement
Table of Contents
