JMA SUPRACODE User Manual page 44

E) Key file: the name of the technical data sheet or file that defines the
cutting characteristics of a key (sides, axes, dimples, etc.)
F) Key code: direct or indirect code of a key, the results are shown that share
the format and whose range or variation of values includes the entered code.
There are two types of code:
1) Direct code: this has a direct relationship with the bitting, and is
translated directly to the key as bitting.
2) Indirect code: there is no direct relationship with the bitting, it is an
identifier that the manufacturer assigns to the bitting and indicates a specific
cut.
G) Search button
If you want to filter by manufacturer, choose this field to open a window for
this. When starting to write the name of the manufacturer in the field at the
top of the window, the application starts to search and suggest manufacturers
whose name starts with the entered text.
1.- Screen for entering manufacturer empty. 2.- Screen for entering
If the JMA model name is known, choose the field for this and a specific
window will open. When starting to write the name of the model in the
field at the left-hand top of the window, the application starts to search and
suggest models whose name starts with the entered text. If a manufacturer
is specified, the suggested options are restricted to the models that JMA
produces for that manufacturer.
44
manufacturer and suggestions.
1.- Screen for entering model empty. 2.- Screen for entering model with
suggestions and model TE-T60 selected (with information showing an
image, manufacturers that use that key and equivalent references of other
manufacturers)
The model search and selection screen show an image of the selected key
at a scale of 1:1 and once the sought model is found, the selection must be
confirmed (or close the window and return)
Example of a search configuration with defined
manufacturer, model and file.
12.5.2 Automotive
This search method is for searching for a key based on knowledge of the
vehicle for which it is required.
Automotive search screen
A) Vehicle search: starts the identification process of the vehicle
for which the searched for key is required.
B) File: functions in the same way as the standard search.
C) Code: functions in the same way as the standard search.
D) Search button: starts the search once a filter is defined.