Care And Maintenance - identités 811125 Instruction Manual

- Check that all screw connections are tightened correctly. Do not sit down without checking that the seat is correctly in place.
- Do not use the chair for any purpose other than that for which it is intended: for example, do not stand on it.
- ALWAYS comply with the weight limits shown on the label or in the instructions.
- Do not modify this product. If necessary, use only original parts to repair it. Only qualified personnel should repair this product.
- Once you have unfolded or assembled the product, make sure that it is locked in the OPEN position and that it is stable on the
floor before using it. Some models are delivered assembled.
- Do not hang anything from your commode. This could unbalance you and cause you to fall.
- If you are not going to be using it for a long time, have your appliance checked by your specialist retailer.
- Do not put on or remove the bucket when the patient is sitting in the chair: there is a serious risk of injury to the genital area!
- On models with lift-up armrests, take great care to avoid pinching fingers.
- If in doubt, do not use it and ask your specialist dealer for advice.
- Only use the chair on a level, stable floor.
- Do not sit on the chair's armrests.
- Do not bend over to avoid tipping over.
MOUNTING & USE
•
Carefully unpack and examine the product to ensure that it is complete.
•
Before use, check for any signs of damage, such as cracked welding, peeling paint, cracked or damaged seat or bent
tube. If you notice any of these problems, please contact us and refrain from using the product.
INSTALLATION :
This product should only be commissioned by qualified personnel. If in doubt, ask your dealer.
Installing the potty :
Lift the seat towards the backrest and remove the potty from the top [B]. It is advisable to put the lid on before transporting the
potty.
Installing the seat :
The seat can be easily removed for cleaning or replacement as it is only attached to the frame by two clips, photo [A].
To remove the seat, unclip the two clips, photo [B]. To replace it, fit the two clips onto the back tube of the chair, photo [C].
By fitting the plug back over the hole, the chair can be used as a normal chair.
USE :
•
Do not allow children or unauthorised persons to play with or use the equipment without adequate supervision.
•
Do not rock backwards and forwards or sideways when using the product, as this will cause excessive stress and may
result in damage and failure which could cause injury.
•
Do not use the product outside the house or on uneven surfaces (such as in the garden), as this will put stress on the
feet and could damage them.
•
Do not put your fingers or foreign objects into exposed tubular sections, as this could cause serious injury.

CARE AND MAINTENANCE

Failure to care for and maintain your product may result in the risk of serious injury.
- Clean the product regularly with a damp cloth and disinfectant. Do not use abrasive products, detergents or solvent-based
products.
- Dry with a soft, clean, dry cloth.
- Before cleaning the chair, remove the two armrests, the backrest and the four extension feet with the end caps. Clean these
parts separately from the main frame.
- The chair must be completely serviced every year, with compulsory lubrication.
- It is recommended that the product be serviced at least once a year. If the product is subject to intensive use and/or use in a
multi-user environment, we recommend that it be serviced more frequently.
- Before each use, check the condition of the rubber feet and seat.
- Be careful, as urine is very corrosive and attacks steel tubes very quickly. It is therefore important to clean and dry the chair
daily.
- In the event of a malfunction, do not repair the product yourself. Consult an authorised dealer.
Version Juin 2023 7