Troubleshoothng - Weider PLATINUM XP600 User Manual

TROUBLESHOOTING
CLEANING THE BAR GUIDES
Over time, dust may build up on the Bar Guides (55),
causing a squeaking noise as the resistance system
is used. Ufthis occurs, wipe off the Bar Guides with a
damp cUothand a mild, non-abrasive detergent. Do not
use soUvents.
ADJUSTING THE RESISTANCE
When the resistance setting changes, the motor wHU
be heard. To prevent damage to the motor, do not
pull any of the cables while the resistance setting
is changing. Ufthe motor has difficuUty adjusting the
resistance UeveU and no came is being pulled, there
may be too much tension on the upper came (B).
Adjust the tension as described beUow.
To decrease the tension on the upper cable (B), turn
the two 3/8" x 1 1/2" Tension Screws (106) twice,
counterclockwise. Select the desired resistance set-
ting. Repeat this step if necessary.
106
19