Weider PLATINUM XP600 User Manual page 16

ATTACHmNG THEACCESSORmES
Toattach a ShortHandHe (67)toa highpuHHey, first
attach thehighpuHHey totheresistance s ystem (see
ATTACHHNG THEHHGH PULLEYS o npage15),Then,
attach theShortHandHe totheShort C abHe (60)witha
CabHe CHip ( 64),
TheLongHandles ( notshown) a ndtheAnkleStrap
(notshown) c anbeattached tothelongcable(not
shown) w ithCable CHips (64), A ttach theLegPress
Strap (notshown) t o bothends of thelongcable,orthe
LatBar(notshown) t otheShortCables (60),withtwo
CableCHips,
ATTACHING T HELEGLEVER
TousetheLegLever(32),attach thetwoendsof the
LegLeverCable(62)totheendsofthe longcable (C)
withtwoCableClips(64),
Detach theLegLever C able(62)fromthe longcable
(C)whentheLegLever(32)is notin use,Store the
endsoftheLegLeverCableonthehookunder the
BenchRail(23),
ADJUSTING THERESISTANCE
Tochange the resistance s etting, p ressthe+
/ -
switch on the Console (53), The display will show the
current resistance setting, The resistance can be
increased up to 240 pounds,
Note: While the resistance setting is changing, the
motor wHHbe heard, To prevent damage to the
motor, do not pull any of the cables while the
resistance setting is changing.
Note: The resistance system uses progressive resist-
ance, As the resistance bar begins to bend, the
amount of resistance wHH increase graduaHHy, As the
bar bends further, the resistance wHH increase rapidHy,
6O
67
C
/
/
/
Hook
16