Setting Up For Controlling A D-Vhsrecorder - Pioneer PDP-5040HD Operating Instructions Manual

÷
Enjoying through E×ternam Equipment
÷
Setting up for controlling a D=VH$ recorder
Yeu can operate the conneCed D-\/HS recorder frem
the Plasma Display that shows the control panel
screen, After making the connections, use the menu to
specify the model of the D-VHS recorder to be operated,
You can operate only a single D-VHS recorder from the
I Press HOME MENU.
2 Press +/4, to select "DTV Setup", and timen press
ENTER,
3 Press 41"/+ to select "i.LINK Setup", and tlmen
press ENTER,
4 Press ÷/4, to select "i.LINK List", and tlmen press
ENTER,
OSD
o Timelist of time registered D*VHS recorders
(i.MNK list) appears.
5 Press +/4, to select time D-VHS recorder model to
be operated, and tlmen press ENTER,
OS
(} Press ÷/4, to select "Connect", and tlmen press
ENTER.
7 Press HOME MENU to exit time menu.
NOTF
The following information appears at the right end of
the i.LINK list to indicate the connection status of the
D-VHS recorders:
Control: Data connection with the D-VHS
recorder has been established and the
recorder is ready for control.
Connected: The D-VHS recorder has been physi-
cally connected, and can be controlled
if it is selected for control.
Other: Equipment other than a D-VHS re-
corder has been physically connected
and thus cannot be controlled.
--: Currently not physically connected
@ii;iiBiiiiiiiWi_iWi_iWi_i ¸,
m
÷
En
PDP5040HD=Eng (65-80) 73 _ 7/24/03, 2:00 PM