Pioneer PDP-5040HD Operating Instructions Manual page 42

÷
Basic Adjustment Settings
Setting for skipping unwanted charmers
From among cenventional 'r\/ channels searched and
set up using Auto Channel Preset, you can select
channels to be skipped when OH +/- are operated.
t Press HOME MENLI,
2 Press ,1,/41, t o select "Setup", and then press
ENTER
3 Press 4/+ to select "Channel Setup", and then
4 Press ÷/,1, to select "Channel ADD/DEI", and then
5 Press ÷/÷ to select "Antenna", and then
press ÷/.t, to select "A" or "B".
7 Press ÷/÷ to select "Add/Delete", and then
press ÷/-_ to select '<Delete".
OSD
8 Press HOME MENU to exit the menu.
II_ NOTE
'[L_restore skipped channels, use the above procedure
except that you select "Add" in step 7.
When using the Cable Convertec you may need to
rnanually add Cable Converter output channels.
÷
Press +/4, to select "Channel", and then
press ÷/.t, to select a channel to be skipped.
÷
OSD
E_G
PDP5040HD-Eng (40-55) 42 _ 7/24/03, 1:59 PM