Picture Adjustments - Pioneer PDP-5040HD Operating Instructions Manual

÷
Basic Adjustment Settings
You can also use the rner_u to change the options.
I Press HOME MENU,
2 Press 4"/+ to select "Picture", and tlmen press
ENTER.
3 Press 4"/+ to select "AV Selection', and timen press
ENTER,
4 Press +/÷ to select timedesired option, and tlmen
Picture adjustments
Adjust the pbture to your preference for the chosen
AV Sebction option (except DYNAMIC),
I Press HOME MENU.
2 Press ÷/_1, to select "Picture", and tlmen press
ENTER.
3 Press ÷/_1, to select an item to be adjusted, and
tlmen press ENTER.
OSD
D
÷
For AV source
STANDARD For a highly defined image in a normally
bright room
DYNAMIC For a very sharp image with the maximum
(factory default) contrast
This mode does not allow manual image
qualify adjustment,
MOVIE For a movie
GAME Lowers image brightness for easier viewing
USER Allows the user to customize settings as
desired. You can set the mode for each
input source.
For PC source
STANDARD For a highly defined image in a normally
(factory default) bright room
USER Allows the user to customize settings as
desired. You (:an set the mode for each
input source.
Press ÷/-I, to select timedesired level, and tlmen
press ENTER.
D
÷
Wlmen an adjustment screen is in display, you
can also clmange an item to be adjusted, by
pressing ÷/,1,.
Press HOME MENU to exit timemenu.
5 Press HOME MENU to exit time menu.
ER
PDP5040HD-Eng (40-55) 48 _ 7/24/03, 7:20 PM