Setting The Timer Manually - Pioneer PDP-5040HD Operating Instructions Manual

÷
Emectroni¢ Program Guide (EPG) (for DTV Onmy)
Setting the timer rnanuaHy
Using the menu, you can abe preset digital TV pre-
grams by specifying their scheduled date and tirne.
I Press HOME MENU.
2 Press ÷/_1, to select "Rec/View Timer", and tlmen
o Timesclmedule table appears.
OSD
t 0 Press ÷/÷ to select "VIEW", "ANALOG" or a D*
VHS recorder, and tlmen press ENTER.
o Select "VIEW" wlmen presetting timeprogram for
auto clmannel select. Select "ANALOG" wlmen
presetting it for recording via a VCR controller.
Select a D*VHS recorder wlmen presetting it for
recording witlm a D*VHS recorder.
, In time Info field, "View OK" appears wlmen
presetting for auto clmannel select is accepted,
and "Rec OK" appears wlmen presetting for
recording is accepted.
÷
Press +/4, to select a list number, tlmen press 4,.
You can select any desired list number.
3
4 Press +/41, to specify
5 Press ÷/_k to specify
6 Press ÷/÷ to specify
press _.
7 Press ÷/÷ to specify
8 Press +/4, to specify
press _.
9 Press ÷/÷ to specify
press _.
a date, and tlmen press €,.
timestart hour, and then press
timestart minute, and tlmen
timeend Imour,and tlmen press
timeend minute, and tlmen
a clmannel number, and tlmen
t I If presetting anotlmer program, press 4"/+ to select
anotlmer list number, and tlmen repeat steps 4 to 6.
You can preset up to 28 programs.
12
Press HOME MENU to exit timemenu.
NOTE
If the schedule of the selected program is overlapped
with another presetting, "Overlapped" appears in the
Info field. Presettigs with "Overlapped" may not be
partially or entirely executed.
When entering into the schedule table, pressing
Ett"rER causes the cursor to lump to an empty field.
Presetting becomes ineffective if the start time and
the end time are identical or if presetting operations
are performed within two minutes before the start of
the program.
Presettings made using the EPG are automatically
shown in the schedule table.
For presetting made using the EPG, "E" appears
beside the channel number in the schedule table. If
you alter the presetting content, "E" disappears.
For priorities about overlapped presettings, see
"Priority rules for overlapped presettings" on page 63.
If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power,
÷
ER
PDP5040HD-Eng (56-64) 62 _ 7/24/03, 2:00 PM