Adjusting Image Positions (Av Mode Only); Adjusting Image Positions And Clock Automatically (Pc Mode Only) - Pioneer PDP-5040HD Operating Instructions Manual

÷
(/Usefum Adjustment Settings
Adjusting image positions
(AV mode onUy)
Adjust the hedzontal and vertical Dositie[]s of irr_,afjes
on the Plasma Display,
t Press HOME MENU,
2 Press ,1,/4, to select "Option", and tl_en press
ENTER
3 Press ÷/4, to select "Position", and then press
ENTER.
4 Press +/4, to select "H/V Position Adjust", and
tl_en press ENTER,
Adjusting image positions and dock
automatically (PC mode onUy}
Use Auto Setup to automatically adiust positions and
clock of images coming from a personal computer,
t Press HOIVIE IVIENU,
2 Press "1"/4,to select "Option", and then press
ENTER,
3 Press ÷/4, to select "Auto Setup", and then press
ENTER.
OSD
_iiiiiii_ii_i;i1_iiiiiiiiii1iii_iii_ ¸,
m
÷
5 Press +/4, to adjust the vertical position or press
÷/._ to adjust the horizontal position,
Auto Setup starts,
4 Press HOME MENU to exit the menu.
NOTE
. When Auto Setup is finished, "Auto Setup com-
pleted," appears,
. Even when "Auto Setup completed," appears, Auto
Setup may have failed, depending on conditions,
. Auto Setup may fail with a PC image composed of
similar patterns or monochrome, If not successful,
change the PC image and try again,
. Be sure to connect the computer to the Media
Receiver and switch it on before starting Auto Setup,
÷
6 Press HOME MENU to exit the menu.
NOTE
'f_)restore the factory defaults for all the items, press
÷/4, to select "Reset" in step 4, and then press
ENTER, A confirmation screen appears, Press ÷/4,
to select "Yes", and then press ENTER,
Adjustments are stored separately according to input
SOUrCe,
ER
PDP5040HD-Eng (81-96) 81 _ 7/24/03, 2:01 PM