2. Product Components
2.1 Cabinet Introduction
Rear cover
(Signal Port)
Power port connection mode: The input end of the power cable is connected to the PWR IN interface, and
the output end is connected to the PWR OUT interface;
Signal port connection mode: Single card version, connect the signal line to DATA1 port; Dual card version
(backup) : DATA1 port is the main card signal cable port, and DATA2 port is the backup signal cable port.
2.2 Product Component Drawing
2.2.1 Mounting frame: used for wall mounting, including single and double frames
1×1 Single frame
2.2.2 Connector plates and bolts are used for installations with steel structure.
- 10 -
Handle
Test button/Indicator
钮/指示灯
1×2 Double frame
Flatness adjustment hole
connection strap /rack hole
Flatness adjustment hole
Cabinet connecting screw
Rear cover
(Power Port)
Anti-knock positioning mechanism
Screw
New HC Series
User Manual