Download Print this page
RF-Lambda REMC26G40GL Instructions Manual

RF-Lambda REMC26G40GL Instructions Manual

Emc benchtop power amplifier 26ghz-40ghz

Advertisement

Quick Links

Features
Wideband EMC Solid State Power Amplifier
Small Signal Gain 55 dB Typical
Output Saturation Power 49dBm Typical
Supply Voltage 110/220 VAC
50 Ohm Matched Input/Output
Over Temperature Protection
Over Current Protection
Electrical Specifications (T
Gain Variation Over Temperature (0⁰C to +50⁰C)
Output 1dB Compression Point (P1dB)
Saturated Output Power (Psat)
Supply Current (220V AC)
Power Added Efficiency (PAE)
Turn On/Off Speed (Switch Disable)
Turn On/Off Speed (Drain Disable)
Turn On/Off Speed (Gate Disable)
Input / Output Connectors
Rev 1. 05-15-2020 | Subject to change without notice
Wideband EMC Benchtop Power Amplifier
26GHz-40GHz
=+25⁰C)
A
Parameter
Frequency Range
Small Signal Gain
Gain Flatness
Input VSWR
IM3
Weight
Impedance
Package
Product Description
REMC26G40GL is a wideband EMC power amplifier with a frequency range
of 26 to 40 GHz.
The power output of this amplifier is 49 dBm typical. The typical small signal
gain is 55 dB with a flatness of ±7dB. This excellent performance is
achieved through the use of GaN devices.
The power amplifier's input connector is 2.92-Male and the output is WR-28.
This product has a calibration feature which enables customer to obtain
great performance through time and temperature changes.
The operating temperature of this product is with in 0⁰C to +50⁰C.
Typical Applications
Wireless Infrastructure
Military and Aerospace Applications
Test Instrumentation
Radar Systems
5G Wireless Communications
Microwave Radio Systems
TR Modules
Research and Development
Cellular Base Stations
Min
Typ
26
48
55
±7.0
±3.0
1.5
46
47
49
-28
15
ON
100
OFF
100
ON
50
OFF
200
ON
1500
OFF
200
58.5 Max.
2.92mm-Male(Input)/WR-28 (Output) (E-Plane)
(Input connector equipped with adapter to 2.92-Female)
(H-Plane available with adapter)
3U Rack-mount/Tabletop Chassis
Sales:
sales@rflambda.com
REMC26G40GL
Max
40
4
50
RF-LAMBDA USA LLC:
Technical:
support@rflambda.com
Units
GHz
dB
dB
dB
:1
dBm
dBm
A
dBc
%
ns
ns
us
us
us
us
lbs.
Ohms
www.rflambda.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the REMC26G40GL and is the answer not in the manual?

Questions and answers

Summary of Contents for RF-Lambda REMC26G40GL

  • Page 1 Wideband EMC Benchtop Power Amplifier 26GHz-40GHz Product Description REMC26G40GL is a wideband EMC power amplifier with a frequency range of 26 to 40 GHz. The power output of this amplifier is 49 dBm typical. The typical small signal gain is 55 dB with a flatness of ±7dB. This excellent performance is achieved through the use of GaN devices.
  • Page 2 *Maximum RF input power is set to assure safety of amplifier. Input power may be increased at own risk to achieve full power of amplifier. Please reference gain and power curves. **For vibration testing details please see additional information section. RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com...
  • Page 3 REMC26G40GL Typical Performance Plots Gain @ +25℃ Input VSWR@+25℃ Isolation @ +25℃ Note: Small signal VNA measurements include attenuators to protect equipment RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical: support@rflambda.com...
  • Page 4 REMC26G40GL Typical Performance Plots Gain vs. Output Power CW PndB vs. Frequency CW Saturation Power vs. Frequency CW Pout vs. Pin RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical: support@rflambda.com...
  • Page 5 REMC26G40GL Typical Performance Plots Left IM3 vs. Pout Right IM3 vs. Pout Delta IM3 vs. Pout Note: IM3 test performed with 1MHz tone spacing RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical:...
  • Page 6 The Gates Open Time is 1500 us @+25℃ The gate control port:D-sub 15 PIN #2 (Gate Disable). The yellow curve is the gate control signal, the blue curve is RF output envelope. RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com...
  • Page 7 LAN Port(remote control) USB-B Port(remote control) USB-A Port (work log) USB-A Port (N/A) Main AC connector AC power supply switch GND connector -40dB Coupling RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical: support@rflambda.com...
  • Page 8 To eliminate the error code, press “RESET” on front panel keypad to reboot the instrument and clear the alarms. If error code can not be eliminated after reboot, please contact support@rflambda.com RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com...
  • Page 9 “[6] Product Info” displays product information All action functions will ask for confirming execution when selected from function selection menu. Note: The data shown here is just for presentation. RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com...
  • Page 10 +5V DC is supplied for reference (200mA) Ground Ground Notes: • HIGH/LOW voltages are standard TTL signals 0.0V-0.8V = LOW. 2.8V-5V = HIGH. RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical: support@rflambda.com...
  • Page 11: Outline Drawing

    155.07 [6.11] Notes: Package Material: Aluminum Finish: White Paint All dimensions are in millimeters [inches]. Standard torque wrench must be used to secure RF connectors. RF-LAMBDA USA LLC: www.rflambda.com Rev 1. 05-15-2020 | Subject to change without notice Sales: sales@rflambda.com Technical:...
  • Page 12 RF-Lambda products are not warranted or authorized for use as critical components in medical, life-saving, or life sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.