Hitachi DZ-MV270A Instruction Manual page 102

Cannot move scene in Move was executed when a program was selected. 72
program mode.
(1) Disc is not format-
ted. If it formats, it be-
comes possible to use
for camera.
(2) However, when you
record from PC con-
nection terminal,
please do not format.
(3) Format the disc
now'?
In DVD-R Disc, Video
mode of the disc re-
corded once cannot
be changed.
Finalize may not be
complete. Finalize
again now?
Disc error has oc-
curred. Finalizing is not
complete.
Scenes over limit. Ca n-
not move scenes.
Top scene cannot be
divided.
End scene cannot be
divided.
Photo cannot be di-
vided.
Cannot combine
scene.
Same scenes on Play
List will be deleted.
Delete scenes?
This disc is recorded by
the PAL system. Please
replace disc.
This disc cannot be
used. Please replace
disc.
DVD-R disc that was not initialized for camera use was
inserted.
38
With DVD-R disc, the movie quality mode once used
for recording cannot be changed. 58
Ir/star/taneous shutoff occurred during Finalizing, after
which power was supplied and disc was inserted. 89
Disc error occurred during finalizing, and finalizing failed.
Replace the discs. 89
An attempt was made to move a scene, even though 68, 84
number of storable scenes was exceeded.
Division is not possible at the start of scene. 83
Division is not possible at the end of scene.
83
Still image cannot be divided. 84
Unless consecutive scenes are selected, they cannot 83
be combined.
This will appear when scenes are to be deleted.
80
This DVD video camera/recorder car/ use only discs
recorded on the NTSC system. A disc recorded on the
PAL system cannot be used on this DVD video cam-
era/recorder.
A disc that cannot be used on this DVD video cam-
era/recorder has been loaded. Checkthe type of disc. 23
102