LawnMaster CLMF4819X Operator's Manual page 15

ASSEMBLY
WARNING
Do not connect the batteries and/or the safety key before the product is completely assembled. Failure
to comply could result in accidental starting and possible serious personal injury.
WARNING
Never operate the mower without the proper safety devices in place and working. Never operate the
mower with damaged safety devices. Failure to heed this warning can result in serious personal injury.
ASSEMBLING THE LOWER HANDLES
1. Pull up and back on the lower handle to raise the handle into operating position. Make sure the
handle snap into place (Fig. 1).
2. Tighten the locking knobs at the base of the lower handle to secure.
3. Fit the upper handle and lower handle together with the locking knobs on both sides of the handle
assembly. Tighten the locking knobs but do not over-tighten. Ensure the bolt and locking knob are
assembled in the correct method. Failure to assemble the locking knobs correctly can result in
damage to the product (Fig. 2).
Fig. 1
Locking Knob
Fig. 2
15
Bolt