H13SRA-TF/H13SRA-F QUICK REFERENCE GUIDE
This motherboard has two M.2 M-key sockets that support the 2280 and 22110 M.2 devices.
One standoff and a screw are pre-installed into the position of each 22110 mounting hole.
Refer to the illustration below for the locations of M.2 sockets and mounting holes. Follow the
steps on the next two pages to install the M.2 device.
2280
22110
Note : It is strongly recommended that you install a heatsink on the M.2 device or use a M.2 device
with a built-in heatsink.
M.2 Device Installation
LAN
BMC
CTRL
M.2-C1
PCIe 4.0 X4
H13SRA-TF
REV:1.01
DESIGNED IN USA
M.2-C2
PCIe 4.0 X4
M.2 Device Installation