TEOS 200E PRO 10-20kVA USER MANUAL 1 Product Description Congratulations on your choice of the UPS uninterruptible power system (UPS), the UPS comes in nominal power ratings of 6-20kVA. It is designed to provide conditioned power to computers and other sensitive electronic equipment.
Page 5
TEOS 200E PRO 10-20kVA USER MANUAL and so on. Storing magnetic media on top of the UPS may result in data loss or corruption. Turn off and isolate the UPS before cleaning it. Use only a soft cloth, never liquid or aerosol cleaners.
Page 6
TEOS 200E PRO 10-20kVA USER MANUAL 1.4 Appearance □ l1=dJ e J C I J C E □ l1=dJ 15/20KH 6/10KS 6/10KH Fig 1- 1: Front View .· · l..J 6/10KH...
Page 9
TEOS 200E PRO 10-20kVA USER MANUAL This results in cleaner power being available to other devices in the building not being protected by the UPS. 1.5.3 Inverter In normal operation, the inverter utilizes the DC output of the power factor correction circuit and inverters it into precise, regulated sinewave AC power.
TEOS 200E PRO 10-20kVA USER MANUAL working normally. The efficiency is up to 98%, but UPS can protect the load from surge disturb. If input power is failure, UPS transfer to battery mode. Shown as Fig 1-7. TVS&RFI EMI filter Output .._...
TEOS 200E PRO 10-20kVA USER MANUAL Installation The system should be installed and wired only by qualified electricians in accordance with applicable safety regulations. NOTICE: UPS operation in sustained temperature outside the range of 15-25 ° C (59 ° °...
TEOS 200E PRO 10-20kVA USER MANUAL To make the UPS have no output, power off the UPS, and then disconnect the utility power supply. (10) Suggest charging the batteries for 8 hours before use. After connection, turn the input breaker in the "ON" position, the UPS will charge the batteries automatically. You can also use the UPS immediately without charging the batteries first, but the backup time may be less than the standard value.
Page 17
TEOS 200E PRO 10-20kVA USER MANUAL UPS1# UPS2# Fig 2- 3: 2 UPS Paralleled System If there are 3 UPS are paralleled, connect communication cables as Fig 2-4. UPS3# UPS 1# UPS2# Fig 2- 4: 3 UPS Paralleled System' must set the UPS i s parallel system as...
TEOS 200E PRO 10-20kVA USER MANUAL 3 Controls And Indicators DD□[ , - T E S T / M U T E D - < > N - c : : : : J - o F F - D ..
Page 19
TEOS 200E PRO 10-20kVA USER MANUAL is in battery mode 1. Press " " to page down the LCD menu 2. Press and hold " " t o fault clear Indicators Description Inverter indicator: green--inverter normal, green flicker-rectifier or inverter is starting or tracking with...
Page 20
TEOS 200E PRO 10-20kVA USER MANUAL buzzer icon will be illuminated. ► Fault icon is illuminated in fault mode, it doesn't display in other cases. Value display and settings area: ♦ The area of menu setting page showing the settable menu options ♦...
Need help?
Do you have a question about the TEOS 200E PRO 10-20kVA and is the answer not in the manual?
Questions and answers