Toyotomi GAN-A28IVL User Manual page 11

Operation of Remote Controller
9
SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function.
This function is available in COOL , HEAT (Only for models with heating function) to maintain
the most comfortable temperature for you.
10
TEMP:
Press this button, you can see indoor set temperature, indoor ambient temperature
on indoor unit's display. The setting on remote controller is selected circularly as below:
When selecting
unit displays set temperature; When selecting
tor on indoor unit displays indoor ambient temperature; 3s later or within 3s it receives other
remote control signal that will return to display the setting temperature.
Caution:
This model hasn't outdoor ambient temperature display function. While remote controller can
operate and indoor unit displays set temperature.
It's defaulted to display set temperature when turning on the unit.
• Only for the models with temperature indicator on indoor unit.
TIMER ON :
11
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply
press this button again.
After press of this button,
ting. Within 5 seconds, press + or - button to adjust the time value. Every press of either button
changes the time setting by 1 minute. Holding down either button rapidly changes the time
setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER ON but-
ton to confi rm.
CLOCK :
12
Press CLOCK button,
time. Holding down either button above 2 seconds increases or decreases the time by 1 min-
ute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after setting,
press CLOCK button again to confi rm the setting, and then
13
TIMER OFF :
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press
the button again.TIMER OFF setting is the same as TIMER ON.
TURBO:
14
Press this button to activate / deactivate the Turbo function which enables the unit to reach
the preset temperature in the shortest time. In COOL mode, the unit will blow strong cooling
air at super high fan speed. In HEAT mode, the unit will blow strong heating air at super high
fan speed.
15 LIGHT:
Press LIGHT button to turn on the display's light and press this button again to turn off the
display 's light. If the light is turned on,
with remote controller or no display, temperature indicator on indoor
disappears and " ON " blinks. 00:00 is displayed for ON time set-
blinking. Within 5 seconds, pressing + or - button adjusts the present
with remote controller, temperature indica-
will be constantly displayed.
is displayed. If the light is turned off ,
11
disappears.
GB