Toyotomi GAN-A28IVL User Manual page 29

Installation of Outdoor Unit
Outdoor Condensation Drainage
(only for Heat pump unit )
During heating operation, the condensing
water and defrosting water should be drained
out reliably through the drain hose.
Install the outdoor drain connector in a Ø25
hole on the base plate and attach the drain
hose to the connector, so that the waste wa-
ter formed in the outdoor unit can be drained
out. The hole diameter 25 must be plugged.
Whether to plug other holes will be determined by
the dealers according to actual conditions.
Bottom frame
Drain plug
Drain connecter
Hose (available commercially,
inner dia. 16mm)
29
Base plate
Outdoor
drain connector
Drain-water hole
GB